Our Clients and Example Projects
Over our 20 year-and-counting history we have worked and collaborated with a number of companies including; AER Engines (Lemans engines), ARRK Technical Services, Binnie Motorsport, Bolin Webb, Cambridge Design Partnership, Caterham Cars, Citroen WRC Team, Cobra Seats, Cosworth Electronics, DC21, Epic Games, Foggy Petronas Racing OEM & Race Team, Funktion-One, IMT Ltd (Vislink), ITG, Gibson Technology, Gigawave Motorsport GT1, Ginetta, Gurit, GTD developments, Hewland (Transmissions), Ilmor Engines (F1 Engine parts), Jordan F1 (Bodywork), LAZER Lights, Lotus Sport, M-Sport, Mitsubishi Motorsports, MMI Research, Mosler, MSX International (OEM Parts), Noble Cars, Nordson Dage, Openworks, Pi Research, Prodrive, REGA, Spinlock, Team Dynamics (BTCC 2008), Quaife (Transmissions), Quasar Microwave Technology Limited, Ultima Sports, Virgo Motorsport GT1, Volkswagen Racing UK, Williams Jet Tenders
As an example of our involvement in lifestyle products, Jules Sturgess Design selected us to make high-end designer chaise’s, the ‘Marea’, each of which were made from twenty two layers of three different weaves of Carbon Fibre pre-preg. More recently, we have been involved in the Poleiro bar stool (images, right) which features a CNC machined, thermoformed PU core with high modulus UD fibres to give the seemingly impossible slim structure the strength to support. This, along with the Marea chaise, featured at the London Design Festival 2017;
Bolin Webb selected us to manufacture the Carbon Fibre top panel for their exclusive X1 Carbon razor, available on Bolin Webb’s website. The Carbon Fibre panel is hand laid, cut, cured and carefully trimmed to size. The panel is then hand sprayed with five layers of acrylic clear coat for long lasting quality;
In early 2018, Openworks Engineering selected us to manufacture the Carbon Fibre panels on their Drone Capture System, the SkyWall Patrol. The SkyWall Patrol system allows operators to physically capture any suspicious drone and bring it to the ground safely, without raising alarm in the surrounding area or causing collateral damage;
Vislink/IMT selected us to manufacture the autoclaved Carbon Fibre chassis for the motorised Mantis MSAT, a lightweight, portable satellite terminal that can be set-up anywhere to provide secure and non-secure data and video transmission in as little as five minutes. It supports X and Ku-Band configurations ensuring worldwide coverage is available at all times. Frequency bands can be swapped in the field in under a minute. The Mantis is designed for rapid deployment in hostile environments. (Image below, left)
Also for IMT/Vislink, we manufacture the casing for the HHT3 Handheld Receiver which has a rugged, light-weight Carbon Fibre autoclaved construction and a 12″ ultra-bright daylight HD screen. The unit is designed for reception of airborne down-links, surveillance and onboard wireless cameras. The unit decodes MPEG2 and H.264/MPEG4 video. (Image below, right);
In 2017, we were selected to manufacture the LAZER fully-molded Carbon Fibre lighting pods which contains 4 x adjustable 6 LED lights. The lighting units are used on M-Sport WRC rally cars as seen below fitted to the WRC championship winning Fiesta, 2017;
Quaife selected us to make Carbon Fibre flywheel covers for their gearboxes. The image below shows a concept gearbox designed for high power/torque transaxles for the increasingly common use of big US V8s such as the LS series.
We also supply Quaife Carbon Fibre flywheel cover integrated with cast bell housing fingers which is used in the popular Mini Challenge gearbox of which 60 have been made so far.
Between 2003-2005, for Foggy PETRONAS Racing, we manufactured 150 full panel sets (inc. structural seat unit) for the road homologation special to allow the FP1 bike to meet the requirements of the FIM. During this period, we employed 20 full time staff and 6 F1 contractors. All delivery times and quality targets were met by our production staff and to both the OEM and FP1 race team.
“To achieve the absolute pinnacle of Hi-Fi turntable design, we had to call upon four decades of research and engineering experience. Seeking the best possible material for each individual component, meticulously researched and prototyped until the ultimate performance was achieved. Exotic materials such as zirconium, titanium, and carbon fibre are used throughout. Realisation of the unique Naiad plinth is entrusted to Reverie’s skilled pre-preg laminating technicians. Many layers of carefully CNC cut Carbon Fibre are hand-layed over a Rohacell foam core before Autoclave curing. The rigidity and low mass of the design minimises the storage and transference of unwanted vibrational energy into
the rest of the turntable.”
- Phil Freeman, Company Coordinator
Embedded on the top and bottom of the plinth are two Aluminium Oxide ceramic braces linking the base of the tone arm to the main platter hub bearing. These braces form a stressed beam structure that helps the tone arm extract more information from the Vinyl record than ever before.
Cosworth Electronics selected us to manufacture the Carbon Fibre components of their popular CCW MK2 steering wheel. The CCW Mk2 is an FIA certified wheel that incorporates a high resoluton, sunlight viewable 900nit, 480x272 QVGA, 16.7M colour 4.3” TFT display. Together with 16 fully confgurable RGB LEDs, all controlled via Ethernet from the latest range of Cosworth data loggers and ECUs.
Quote from Cosworth-
“We are delighted with the support and service that we receive from ReVerie in provision of moulded and CNC-machined carbon fibre for our steering wheels, inc. the CWW277 Mk1 & Mk2. We have been satisfied with the quality and efficiency of their work, which in turn has enabled us to maintain the high standards for which the Cosworth name is internationally renowned.”
Cosworth Electronics - Annys Kirk
